Tetrix Bearing Size

[team63]

Does any one know the OD and ID of the Tetrix Pivot Bearings?

[Bruceb]

If you are talking about the bronze bushings I believe they are 3/16 id and 5/16 od.
Bruce

[rees2001]

The OD is .315", the id is .115".

good luck

[IKE]

Originally Posted by rees2001

The OD is .315", the id is .115".

good luck

Assuming you are talking about the servo bearing.

id is 3mm
OD is 8mm

It is about 3mm wide. It comes with a screw, nut and a couple of washers.

[rees2001]

Originally Posted by IKE

Assuming you are talking about the servo bearing.

id is 3mm
OD is 8mm

It is about 3mm wide. It comes with a screw, nut and a couple of washers.

Yep, the servo bearing. I just checked it quick with a set of calipers. I tried a 3mm screw but it didn't fit in the one I checked.