|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Tetrix Bearing Size
Does any one know the OD and ID of the Tetrix Pivot Bearings?
|
|
#2
|
||||
|
||||
|
Re: Tetrix Bearing Size
If you are talking about the bronze bushings I believe they are 3/16 id and 5/16 od.
Bruce |
|
#3
|
||||
|
||||
|
Re: Tetrix Bearing Size
The OD is .315", the id is .115".
good luck |
|
#4
|
||||
|
||||
|
Re: Tetrix Bearing Size
Assuming you are talking about the servo bearing.
id is 3mm OD is 8mm It is about 3mm wide. It comes with a screw, nut and a couple of washers. |
|
#5
|
||||
|
||||
|
Re: Tetrix Bearing Size
Yep, the servo bearing. I just checked it quick with a set of calipers. I tried a 3mm screw but it didn't fit in the one I checked.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|