|
Re: Arduino and LabVIEW
Quote:
Originally Posted by WizenedEE
Setting a TRUE output on a DIO slot sends 5V of power down the wire. That's one bit, not 32. He's planning on using four DIO slots to send 4 bits of data to the arduino.
Just a note, you can put the PWM cable in sideways on the signal so you use two cables instead of four.
Can you put a multimeter on the slots? Can you post the arduino sketch?
|
Oh, then NVM me, I thought he was sending data through ethernet
__________________
Do not say what can or cannot be done, but, instead, say what must be done for the task at hand must be accomplished.
|
FIRST like life is what you make of it, if you would rather go through FIRST worrying about what other teams do to make their robots, then your destined for disappointment. if you go through FIRST making the most of it doing the best you and your team can then it doesn't matter what other teams do. - Mike Schroeder [more] 
Threaded Mode