Robot Inspection Checklist Prior to Matches

[PAR_WIG1350]

Originally Posted by wireties

It may seem silly but - continually check for loose screws! - with the battery disconnected of course

HTH

Oh, for a second I forgot what this thread was about.

Also, check all electrical connections, breakers, fuses, etc. Be sure to include the fans on victors, the 5 volt regulated output (if used for a camera) and the 12 volt regulated output on the power distribution board, and the breaker in the spike that controls the compressor (the other spikes should have fuses which are a bit more secure since they don't stick out. Also, check to see if any chains have come off their sprockets and for any other type of misalignment.