Go to Post I am a geek. - Andy Baker [more]
Home
Go Back   Chief Delphi > Technical > Pneumatics
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #20   Spotlight this post!  
Unread 06-05-2011, 16:13
Randy Forgaard's Avatar
Randy Forgaard Randy Forgaard is offline
Parent 1729, former mentor 3126
FRC #7129
Team Role: Parent
 
Join Date: Oct 2009
Rookie Year: 2010
Location: Hollis, NH, USA
Posts: 48
Randy Forgaard is a splendid one to beholdRandy Forgaard is a splendid one to beholdRandy Forgaard is a splendid one to beholdRandy Forgaard is a splendid one to beholdRandy Forgaard is a splendid one to beholdRandy Forgaard is a splendid one to beholdRandy Forgaard is a splendid one to behold
Re: Slowing down the action of a cylinder with flow control, mechanical or via softwa

Quote:
Originally Posted by jspatz1 View Post
A hard stop on the cylinder will probably not be any less problematic than a hard stop on the frame (it will still "slam"), and is very hard on the cylinder itself.

It is always easy to shorten the working length of a cylinder. Simply add a spacer between the clevis and the nose of the cylinder, so that it bottoms out externally on the spacer instead of internally on the piston. You can always use a cylinder that is a little longer than needed with this technique, but you can't get more stroke out of a cylinder that is too short.
All good points, many thanks. That's a very good point about shortening the working length of the cylinder, and that a hard stop on a cylinder is at least as hard (and damaging) as a hard stop on the frame.

I am inclined to have us look carefully at your suggestions in your earlier post about reworking the design of the arm to use springs, counterweights, and/or shock absorbers to more organically use the pneumatics for what it is intended. We will also experiment with flow control fittings (we just ordered some this afternoon) to see if that might get us most of the way there, since it's such an easy solution.

Thank you again!
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 16:22.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi