|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#4
|
||||
|
||||
|
Re: Urethane vs. Neoprene Belts
Part #'s would definitely help. For example, the little 1/4" round urethane belts offered by McMaster will either have too much slip or cause too much torque loss as the belts round the pullies due to tightening to remove the slip.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|