Urethane vs. Neoprene Belts

FIRST encourages us to innovate and try new things, lets do the same for them. - Katie_UPS [more]

		Chief Delphi > Technical > Technical Discussion
Urethane vs. Neoprene Belts

Thread Tools

Rating:

Display Modes

16-06-2011, 15:28

gingersalad gingersalad is offline

Liani Lye

FRC #0687 (Nerd Herd)

Team Role: Mechanical

Join Date: May 2011

Rookie Year: 2011

Location: California

Posts: 3

gingersalad is an unknown quantity at this point

Re: Urethane vs. Neoprene Belts

I read a post regarding types of belts in drives, and I was considering using 3/8" 0.2 pitch for both steering and driving the modules.

Types of belts thread: http://www.chiefdelphi.com/forums/sh...ght=belt+pitch

Hmm, for part numbers... how about comparing 1679K19 (urethane) and 6484K219 (neoprene)? They're both 3/8" 0.2 pitch, single sided with trapezoidal teeth, and have an outer circle of 9".

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 05:14.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.