Printing out robot parts

[Trent B]

We get our printing done by Redeye/Stratasys when we get it done (so FDM type). If I remember right this was printed with ABS for about 200 or 300 bucks (it would have been cheaper had we CADed holes in it.



We also had a scale model of our robot printed.



That is sitting on a 13" macbook for scale and it printed the gears inside the gearboxes and the fans in the RS775s

The more interesting part about the scale model is there was no "support material" used to model that as far as I am aware, it was all printed "free form" because of the viscosity of the melted plastic, so all parts that extend horizontally were printed unsupported.

[Chickenonastick]

Funny, a mentor of ours sent us the exact same link yesterday.

[George C]

Check out www.reprap.org for a 3D printer you can build yourself. Once you have built one, you can use it to print parts for another one.

[team222badbrad]

3D printing is definitely a great tool for some robot parts.

As I am the owner of Print To 3D and mentor of 222; I have donated machine time and material to them.

This past year we used several FDM parts on our robot such as:

A pulley/capturing device for surgical tubing.
Spacers
Transmission pneumatic shifting mount
Encoder mount for elevator.

In addition I also printed up an entire transmission for display as seen here:
http://www.youtube.com/watch?v=rj6naPPiQOw

Also as previously mentioned the wrench replication video is misleading.
If you want to read up on it see here:
http://fabbaloo.com/blog/2011/7/20/3...ntroversy.html

I had to deal with lots of phone calls and emails as one of my videos is "related" to this controversial wrench video on Youtube. Some were non believers while others were amazed they didn't know this technology existed.

In addition to using 3D printed parts on our robots many FIRST related companies such as AndyMark also use printed prototypes to verify their products are ready for competition before expensive tooling is ever made.
http://printo3d.com/andymark.html

Bradley

[pfreivald]

Pardon the threadomancy, but I was wondering if anyone had specific recommendations on a machine for a FIRST Team who might have stumbled upon a few thousand dollars specifically for the purchase of a 3D printer...

All I really know about the technology is that it's really neat and that there are people who want to acquire one for our technology department and FIRST team, so any suggestions on technologies to acquire, brands to investigate or avoid (and why), etc would be most appreciated!

Thanks!

Patrick

[Samk]

Originally Posted by pfreivald

Pardon the threadomancy, but I was wondering if anyone had specific recommendations on a machine for a FIRST Team who might have stumbled upon a few thousand dollars specifically for the purchase of a 3D printer...

All I really know about the technology is that it's really neat and that there are people who want to acquire one for our technology department and FIRST team, so any suggestions on technologies to acquire, brands to investigate or avoid (and why), etc would be most appreciated!

Thanks!

Patrick

At our school we have the personal uprint, it prints white only, but also prints a support material. You have to buy a clean station separately which dissolves the support material. The machine works very well, only problem being that the plastic adds up really fast, I think each spool is 30 cubic in, and each cubic inch is $5, and cubic inches go buy really fast. We just got it right before the summer, so hopefully this year our team can use it for some quick prototyping ( our school is making us pay for plastic, not machine time though)

[msimon785]

Definitely the UPrint. While there are countless machines on the market, some cheaper (however less professional, ex: the makerbot), the UPrint seems to be the most cost-effective 3d Printer for personal use on the market.
You can find it here.

[Trent B]

I believe we may have had some parts printed on a U-print, or a dimension, they are very high quality but I will agree it gets expensive fast. The images I added earlier were printed by Stratasys.

The makerbots do have their merits being lower cost to entry, I believe Aren hill has done some fairly extensive research on budget 3d printing for the Iowa State University robotics team.

[Tom Bottiglieri]

We printed replacement tops to our joysticks because we didn't like where the buttons were.

[pfreivald]

Thanks, folks!

[team222badbrad]

As a 3d print service provider I have much experience with Dimension/Stratasys machines.

If the uPrint fits or uPrint Plus fits your budget then you will have a great machine on your hands especially if you need end use parts.

If you have any questions about these machines let me know. Email me direct at printo3d ( at ) printo3d ( dot ) com

Don't let the price fool you. All said and done with all the bits you are talking $19 to $24k. They should have educational discounts so don't forget to ask. Also if time isn't of essence you might want to wait until your local dealer releases a demo unit to save some money. Used units from the dealer should still include the standard new warranty.

Exactly how many thousands of dollars do you have? Don't forget to add dozen or so material cartridges into your initial purchase.

[pfreivald]

I don't know how many thousands of dollars, exactly -- that's why I came here to find out how many thousands of dollars I'd need to have!

Originally Posted by team222badbrad

As a 3d print service provider I have much experience with Dimension/Stratasys machines.

If the uPrint fits or uPrint Plus fits your budget then you will have a great machine on your hands especially if you need end use parts.

If you have any questions about these machines let me know. Email me direct at printo3d ( at ) printo3d ( dot ) com

Don't let the price fool you. All said and done with all the bits you are talking $19 to $24k. They should have educational discounts so don't forget to ask. Also if time isn't of essence you might want to wait until your local dealer releases a demo unit to save some money. Used units from the dealer should still include the standard new warranty.

Exactly how many thousands of dollars do you have? Don't forget to add dozen or so material cartridges into your initial purchase.

[thefro526]

Originally Posted by team222badbrad

As a 3d print service provider I have much experience with Dimension/Stratasys machines.

If the uPrint fits or uPrint Plus fits your budget then you will have a great machine on your hands especially if you need end use parts.

If you have any questions about these machines let me know. Email me direct at printo3d ( at ) printo3d ( dot ) com

Don't let the price fool you. All said and done with all the bits you are talking $19 to $24k. They should have educational discounts so don't forget to ask. Also if time isn't of essence you might want to wait until your local dealer releases a demo unit to save some money. Used units from the dealer should still include the standard new warranty.

Exactly how many thousands of dollars do you have? Don't forget to add dozen or so material cartridges into your initial purchase.

I'm going to throw in another good word for Dimension/Stratasys Machines.

We have an SST1200 in my department at work that I use pretty regularly for parts and a BST768 at the School that we can also use for parts. (I prefer the 1200 because it's much, much faster) The school's machine was bought with grant money in 2006/2007, and was somewhere around 25k. I believe they've come down quite a bit in price.

I've found that the printer is great for making spacers and other little parts that don't see much load. I think I made something like 18 spacers for our drive last year and they came out to all of .1lbs.

We're also looking at getting a Fortus Machine at work that can print in Polycarbonate along with some high strength ABS blends. From what I've seen, the Polycarbonate is strong enough for some FRC uses. The machine starts around 80/90k or so.