|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#22
|
|||||
|
|||||
|
Re: Help with CNC "router"
We were able to find the controller and manual for it, haven't been able to test yet (Need to find 220 single phase...).
The manual explains a lot, especially the lack of spindle and odd axis arrangement. It actually is a Yamaha "FLIP Series" robot. Which appears to be a stripped down and repackaged router. So, although it looks like the 2 of the 3 axis from a large gantry router, this was it's original configuration. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|