Empty Field Picture

[rahilm]

Originally Posted by Duke461

No idea there
If you have any CAD skills, you could CAD it. 1323 has made fields in the past, but they havent put up this years yet. You could PM someone and see if they have a file.
Currently im looking through team's with well developed website's for photos.

PTC has the full field available here. It is only Pro/E format, though.

[jhellr13]

Originally Posted by rahilm

PTC has the full field available here. It is only Pro/E format, though.

yea idk...i really appreciate the help. I'll figure something out

[rahilm]

Originally Posted by jhellr13

yea idk...i really appreciate the help. I'll figure something out

If you give me a general idea of the type of view you want, I can render the CAD for you and post an image up.

[Tom Ore]

I can render a field for you. I'll be tied up for a couple of weeks so it will be a while before I can get to it. Attached is a render of just the end of the field to give you an idea of what it would look like.

[jhellr13]

Originally Posted by Tom Ore

I can render a field for you. I'll be tied up for a couple of weeks so it will be a while before I can get to it. Attached is a render of just the end of the field to give you an idea of what it would look like.

I'm kind of tight on time, i need it for a school event in 3 weeks. The perspective i want would be like the image first posted above, just straightened out. Like if you were able to take that image, and just make it straight so the picture isn't slanted. That's all i really need

[Duke461]

Ok, i am sooo close to getting you what you need. I found a 3ds Max file of the field. Its well done, and they supplied a photo, buts its in isometric view (not the view you need). the other problem, i dont have the program to open the file, rotate, and re upload. so, if someone that has 3ds Max, would you please help him out and give him a rotated picture.
Attached is a file

EDIT: Does a top view help?
EDIT EDIT: Nevermind, i read above you said a top view doesnt work
EDIT EDIT EDIT: Not 100% if this is a perspective view, but the blog called it one:

[jhellr13]

Originally Posted by Duke461

Ok, i am sooo close to getting you what you need. I found a 3ds Max file of the field. Its well done, and they supplied a photo, buts its in isometric view (not the view you need). the other problem, i dont have the program to open the file, rotate, and re upload. so, if someone that has 3ds Max, would you please help him out and give him a rotated picture.
Attached is a file

EDIT: Does a top view help?

A top view is a good start. Not really what i need, but a start. If someone can PLEASE just rotate the file, and make it a jpeg or something, that would outstanding. Possibly take out the tubes in the middle if they want, though i could probably figure that out with cloning in gimp or something. Please someone help us out

[Duke461]

What about the perspective posted above?

[jhellr13]

Originally Posted by Duke461

What about the perspective posted above?

Look at the first image posted in this thread. That kind of perspective, just straightened out.

[Duke461]

I found a completely gray CAD of the field. its pretty bland so idk if it'll work. CD only allows 100 KB for bmp, so attached is a google photos link for the picture.
Hope this helps,
-duke

https://picasaweb.google.com/1145882...82874231308658

P.S. i can change the view and reupload if you need it.

[ratdude747]

Originally Posted by Duke461

I found a completely gray CAD of the field. its pretty bland so idk if it'll work. CD only allows 100 KB for bmp, so attached is a google photos link for the picture.
Hope this helps,
-duke

https://picasaweb.google.com/1145882...82874231308658

P.S. i can change the view and reupload if you need it.

FYI your link is bad.

[Duke461]

Originally Posted by ratdude747

FYI your link is bad.

Ah. Its hard to know (or at least more annoying) when its your own accounts picture if the link works.
Here is a google docs link to the .bmp download:
https://docs.google.com/leaf?id=0B2j...mNjg4&hl=en_US

Originally Posted by akoscielski3

go to www.3dcontentcentral.com and look up FRC Field 2011. then you only need to change the colour of the parts and it would work... no skills required

Except for the fact the file is all one part......

[Aren Siekmeier]

Originally Posted by Duke461

Except for the fact the file is all one part......

In SolidWorks (can't say about Pro/E, Inventor, and others, but I imagine it's also the case there) you can change appearance of individual bodies and faces. Right click them and click the Appearance icon (a colored sphere). Not ideal, but you can get color discrimination within a single part that way.

Edit: Also, With a the appropriate render of just the gray CAD you could just use photoshop or gimp or similar to add the colors. It could be tricky to get the anti-aliasing just right.

[StashZabriski]

I took this one at the Lone Star Regional after we had set up the tubes on the outside of the field.

Its the best live view shot of the field that I have.

[Duke461]

Originally Posted by compwiztobe

In SolidWorks (can't say about Pro/E, Inventor, and others, but I imagine it's also the case there) you can change appearance of individual bodies and faces. Right click them and click the Appearance icon (a colored sphere). Not ideal, but you can get color discrimination within a single part that way.

Edit: Also, With a the appropriate render of just the gray CAD you could just use photoshop or gimp or similar to add the colors. It could be tricky to get the anti-aliasing just right.

Yeah, ive got Inventor.
I have very little experience with photoshop.
Ah well, he finally got the picture he needed. Its actually kind of surpising there wasnt a picture of a blank field that could be easily attained