Empty Field Picture

[jhellr13]

Originally Posted by Duke461

Ok, i am sooo close to getting you what you need. I found a 3ds Max file of the field. Its well done, and they supplied a photo, buts its in isometric view (not the view you need). the other problem, i dont have the program to open the file, rotate, and re upload. so, if someone that has 3ds Max, would you please help him out and give him a rotated picture.
Attached is a file

EDIT: Does a top view help?

A top view is a good start. Not really what i need, but a start. If someone can PLEASE just rotate the file, and make it a jpeg or something, that would outstanding. Possibly take out the tubes in the middle if they want, though i could probably figure that out with cloning in gimp or something. Please someone help us out

[Duke461]

What about the perspective posted above?

[jhellr13]

Originally Posted by Duke461

What about the perspective posted above?

Look at the first image posted in this thread. That kind of perspective, just straightened out.

[Duke461]

I found a completely gray CAD of the field. its pretty bland so idk if it'll work. CD only allows 100 KB for bmp, so attached is a google photos link for the picture.
Hope this helps,
-duke

https://picasaweb.google.com/1145882...82874231308658

P.S. i can change the view and reupload if you need it.

[ratdude747]

Originally Posted by Duke461

I found a completely gray CAD of the field. its pretty bland so idk if it'll work. CD only allows 100 KB for bmp, so attached is a google photos link for the picture.
Hope this helps,
-duke

https://picasaweb.google.com/1145882...82874231308658

P.S. i can change the view and reupload if you need it.

FYI your link is bad.

[Duke461]

Originally Posted by ratdude747

FYI your link is bad.

Ah. Its hard to know (or at least more annoying) when its your own accounts picture if the link works.
Here is a google docs link to the .bmp download:
https://docs.google.com/leaf?id=0B2j...mNjg4&hl=en_US

Originally Posted by akoscielski3

go to www.3dcontentcentral.com and look up FRC Field 2011. then you only need to change the colour of the parts and it would work... no skills required

Except for the fact the file is all one part......

[Aren Siekmeier]

Originally Posted by Duke461

Except for the fact the file is all one part......

In SolidWorks (can't say about Pro/E, Inventor, and others, but I imagine it's also the case there) you can change appearance of individual bodies and faces. Right click them and click the Appearance icon (a colored sphere). Not ideal, but you can get color discrimination within a single part that way.

Edit: Also, With a the appropriate render of just the gray CAD you could just use photoshop or gimp or similar to add the colors. It could be tricky to get the anti-aliasing just right.

[StashZabriski]

I took this one at the Lone Star Regional after we had set up the tubes on the outside of the field.

Its the best live view shot of the field that I have.

[jhellr13]

Originally Posted by StashZabriski

I took this one at the Lone Star Regional after we had set up the tubes on the outside of the field.

Its the best live view shot of the field that I have.

That picture is PERFECT!!! Thanks everyone for the help. You guys went above my expectations to help me out

[rsisk]

Originally Posted by jhellr13

That picture is PERFECT!!! Thanks everyone for the help. You guys went above my expectations to help me out

This is ChiefDelphi after all, what else would you expect

[jhellr13]

Originally Posted by rsisk

This is ChiefDelphi after all, what else would you expect

true true

[StashZabriski]

Originally Posted by jhellr13

That picture is PERFECT!!! Thanks everyone for the help. You guys went above my expectations to help me out

All you crazy engineers trying to get digitally created mock-ups of the field *shakes head*

Its so much easier to just go into the ole camera phone and pull off a photo


~Stash~
-Non-engineering mentor-

[Duke461]

Originally Posted by compwiztobe

In SolidWorks (can't say about Pro/E, Inventor, and others, but I imagine it's also the case there) you can change appearance of individual bodies and faces. Right click them and click the Appearance icon (a colored sphere). Not ideal, but you can get color discrimination within a single part that way.

Edit: Also, With a the appropriate render of just the gray CAD you could just use photoshop or gimp or similar to add the colors. It could be tricky to get the anti-aliasing just right.

Yeah, ive got Inventor.
I have very little experience with photoshop.
Ah well, he finally got the picture he needed. Its actually kind of surpising there wasnt a picture of a blank field that could be easily attained

[paragon]

I found a picture on Google.I hope this helps !
The only thing I am worried about is if the pixels will stretch. However, you can always fix that in Adobe Premier Pro, if you have it?

[jhellr13]

Originally Posted by Duke461

I found a completely gray CAD of the field. its pretty bland so idk if it'll work. CD only allows 100 KB for bmp, so attached is a google photos link for the picture.
Hope this helps,
-duke

https://picasaweb.google.com/1145882...82874231308658

P.S. i can change the view and reupload if you need it.

It says that i do not have permission to see the photo, but i'll take a risk with it. Can you please change the view for me? Also, are you capable of at least adding the tape or some tubes to make it look at least legit? Something so it isn't so bland? Thanks