|
|
|
 (The wheels) need to be green anodized, and then assembled with yellow anodized spinners. ... and then, on the spinners, you can etch "JVN is a dweeb". That would be cool. - Andy Baker [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Gearbox's
Does anyone have a 3d or a 3-view DWG or 3DS of a gear box used on a FIRST robot? (Your team or others)
I'm a little confused on how these are constructed/shifted. In the past 247 has used a small pneumatic cylinder to change from high/low gear on drill motors instead of using a shifting gearbox (transmission) so I have not had a chance to look inside one. Please either send to me via AIM ( Ompha1oskepsis ) or IRC ( Gadget-_-247 on irc.webmaster.com or tP-InfamousGadget on irc.gamesnet.net ) |
|
#2
04-12-2002, 20:01
|
||||
|
||||
|
gearbox
Check the whitepaper section of this site. A new gearbox and transmission was just posted. It is not in .dwg format but it is very detailed.
|
|
#3
04-12-2002, 22:16
|
|||||
|
|||||
|
Ask Jack. He's the team animator for 201, and he made a 3DS animation of our gearbox from last year.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
