|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#9
|
|||||
|
|||||
|
Re: Hex shafts?
You can run other alloys in lower load spots, but in drive I would recommend 7075. We had no issues in 2010.
Don't buy metal from mcmaster, buy from a real supplier and you can get 7075 hex for very cheap. We use hex on everything, its so much nicer than keyways. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|