Chassis - Team 772 2011 off-season (update)

[akoscielski3]

I finished updating the chassis.

Old thread is : http://www.chiefdelphi.com/forums/sh...ad.php?t=97193d

Gen2 Andymark transmissions
6WD (IFI 6" diameter 1.5" wide)
1/8" sheet metal
0.75" flanges for structural support
Direct drive to middle wheel

Changes:
Sheet metal to 1/8" from 0/09"
Put supports across transmissions
Moved Back/Front plates to outside
Put Belt pulleys onto wheels
inserted Hub onto middle wheel for direct drive
Made a few more flanges for structural support (note: could not put too many on bottom because the belts would rub against them)

Frame weighs 9.27 pounds without motors or transmission.
Chassis total weight is 27.35 pounds

Any more questions or Tips for improvement are appreciated.