Wireless not working (Help)

[linuxboy]

When you go to program your radio at competition it changes the settings on the radio. I find the easiest thing to do after using that programming kiosk is to just reset the radio and follow the radio configuration instructions from the beginning provided on the Kit Of Parts page.

[Tommy F.]

The first thing I did when I seen the robot was back at our school after going to Championships, I turned it on and reset the radio.

Here's the .pdf file on the FIRST KoP site that you should use right now:
http://usfirst.org/uploadedFiles/Rob...adio_Rev_A.pdf

You should only need to do the Resetting a radio to default settings, and the Configuring a radio for team use steps.

You also might need to do the Connecting to the DAP-1522 via Wi-Fi so you can connect your computer to the radio to do the other 2 steps.

[daniel_dsouza]

The absolute worse case scenario is that your DLink's firmware is corrupted.

Before anyone freaks out, this is the last thing it could be, but it happened to us last season and we had two people spending most to the season trying to figure out what was wrong.

If this is the problem, then the router power light will be flashing (besides the 50 or so seconds it takes to turn on.) You will also not be able to access any settings through a broswer.

To solve this problem go to:http://www.usfirst.org/uploadedFiles...Web_Server.pdf

and you will need this file: http://www.usfirst.org/uploadedFiles...522_fw_121.zip

Which can be found here: http://www.usfirst.org/roboticsprogr...c-kit-of-parts

Good luck,
Daniel D.