HELP!!!!!!!! with Labview Errors

[inkspell4]

Im geting a error within the FPGA_ReadAI.vi that is within the hiearchy of the Build Dashboard Data.vi on the FRC 2011 Crio Project this is frustrating as the code worked until i added a Encoder Reset function into Begin.vi. I also have gatten a error within the code in which to vision processing is done and the WPI_CameraIssue HTTP ... .vi. can you help and i dont know how to post the code.

Thanks in advance

[Larry Lewis]

Could you post a screen shot of the error you are getting it may help others understand the issue better. Just do a Alt+PrtScn with the window selected. Then open paint and paste it into a jpg file. Finally attach it to the reply post using the attach button.

[inkspell4]

Originally Posted by Larry Lewis

Could you post a screen shot of the error you are getting it may help others understand the issue better. Just do a Alt+PrtScn with the window selected. Then open paint and paste it into a jpg file. Finally attach it to the reply post using the attach button.

I will try my best but it will have to wait till Monday as the robot is at school

[Greg McKaskle]

As mentioned, please post more info, but my guess is that in Begin, some form of I/O based on the FPGA is no longer opening due to the latest modification. Without more of the error chain, it can't be narrowed down. I'm not really sure why the error is first showing up in the prep dashboard code except that it reads virtually everything in it's current form. If this is how the tea leaves dry out, focus on fixing the open error and all should work fine.

Greg McKaskle

[inkspell4]

Thanks for trying to help but it was all because our crio had image v28 not v30

[Jon236]

Originally Posted by inkspell4

Thanks for trying to help but it was all because our crio had image v28 not v30

It's great that you posted the solution to the problem, as then you and other teams can be sure to add 'Check version of FPGA image' to their trouble-shooting check-list.

[inkspell4]

Originally Posted by Jon236

It's great that you posted the solution to the problem, as then you and other teams can be sure to add 'Check version of FPGA image' to their trouble-shooting check-list.

Sounds Like a good idea and if you have one of these trouble-shooting check-lists could you please post it here as we are a new veteran team but our rookies in the labview programing language and just lost our only programer(don't ask me why we only had one i have no idea but we were a very small team)