|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#23
|
||||
|
||||
|
Re: High Tensile Sprocket Bolts
If you're having that much trouble with 10-32 bolts shearing off, why not just drill out the holes and use a #12-24 NC or 1/4-28 NF? McMaster Carr doesn't seem to carry #12-28 NF but other suppliers might.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|