|
Re: Using the school's Network as the Bridge
Well I made a new attemp yet again today, and I used the components that come with FIRST so y'all can test it yourself if ya want (used: DAP-1522, WRT610N, and all the other normal robot components).
-First I reset the DAP-1522 (pressed and held "reset" button) and followed the FRC manual for configuring it (IP, SSID, etc).
-Then I reset the WRT610N (held "reset" button) and left the IP as the default (192.168.1.1, I believe) and changed the SSID to 539.
-So I connected my Laptop (IP of 10.5.39.6) to the WRT via cable, and the WRT was connected to the DAP via cable, and the DAP was connected to the cRIO via cable.
-----From that, I recieved communication to the cRIO in the Driver Station.
-So I disconnected the cable going from the WRT to the DAP.
-----I was not able to recieve communication by doing that.
So, any suggestions?
|
The culture has shifted, people. You can act shocked and complain, and likely lose the attention of the students you want to reach through FRC and other activities, or you can shift with it, and make FRC relatable and relevant to a bunch of good kids with foul mouths. - mrnoble [more] 
01-11-2011, 17:08
Threaded Mode