Transmission CAD

[akoscielski3]

My team is designing a chassis (well i am), and i want to use transmissions that we already own. They are Gen2 AndyMark transmissions (AM-0076). However the CAD I downloaded from AndyMark are a different Part # (They have AM-0957). I need to find the CAD to AM-0076, because both transmissions are diffrent from each other. Does anybody already have these transmissions in CAD? Or know where to find them?

(We have already e-mail AndyMark, if we get a response i'll be sure to say it)

[tim-tim]

Try team1323.com they have a pretty extensive CAD Library.

You also may want to try searching FIRST Robotics CAD Libraries in google

[R.C.]

Originally Posted by tim-tim

Try team1323.com they have a pretty extensive CAD Library.

You also may want to try searching FIRST Robotics CAD Libraries in google

The library should be getting a major facelift and about a grand total of about 600 total parts vs the 300 now. This won't be done till next year, but its something to look forward to!

-RC

[akoscielski3]

Originally Posted by tim-tim

Try team1323.com they have a pretty extensive CAD Library.

Nope. No trannssmission.

Would it be possible to make the new version of side plates and use the old parts? I believe the only thing that changed were the placement of the holes and size of the transmission.