Can't deploy from netbeans or eclipse

[plnyyanks]

Originally Posted by linuxboy

... connected computers with the IP Address 10.37.80.2 ...

Actually, .2 is the IP for the cRIO, not a computer, and remember to change the IP scheme to reflect your team number (10.xx.yy.zz, where xxyy is your team number). Your computer would need to be: 10.35.60.7 (or something greater than .5), and your cRIO needs to be 10.35.60.2.

For a nice diagram/table of the proper IP addresses, look here (note: it's an old document, from 2009. but the IPs haven't changed). Look at Section 5.2/Page 6.

[linuxboy]

Originally Posted by plnyyanks

Actually, .2 is the IP for the cRIO, not a computer, and remember to change the IP scheme to reflect your team number (10.xx.yy.zz, where xxyy is your team number). Your computer would need to be: 10.35.60.7 (or something greater than .5), and your cRIO needs to be 10.35.60.2.

For a nice diagram/table of the proper IP addresses, look here (note: it's an old document, from 2009. but the IPs haven't changed). Look at Section 5.2/Page 6.

Right, by connect with, I meant use that IP to connect to cRIO.

Oliver