|
|
|
 My suggestion is to first focus in on your drive base. Get it running, and drive it into the ground and see what breaks. Then fix it. Rinse wash and repeat. - Andy A. [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| My suggestion is to first focus in on your drive base. Get it running, and drive it into the ground and see what breaks. Then fix it. Rinse wash and repeat. - Andy A. [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
CAD problems
Hey guys, I need help
I"m having a problem making holes in an angle that I'm working on in AutoCAD. I have poles set up where I want to create my holes, and I'll click on Subtract, click on my angle, then hit enter, but after I hit enter the commandline says "No solids, surfaces, or regions selected." Any help is much appreciated. Thanks, -Marley 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode