|
|
|
 You can never be done too early for more testing and practice! - Donut [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| You can never be done too early for more testing and practice! - Donut [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Sprocket Tensioning
I've heard that for #35 chain, if you space the sprockets 3/4 in away from each other, you do not need tensioners? Is this true, and if so, where is the measurement taken from? Furthermore, do most teams prefer using this method, or machining bearing blocks? Thanks in advance.
Last edited by MichaelBick : 11-12-2011 at 15:00. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode