Questions about AM super shifters

[JesseK]

Note that if you use AM Shifters with pneumatics, you'll want to CAD them to ensure that the pneumatic cylinders do not interfere with each other. This is especially crucial if you use the C-Base setup and direct drive the middle wheels.

If you're doing a kitbot-on-steroids setup, this isn't really a concern.

[Jared Russell]

Originally Posted by JesseK

Note that if you use AM Shifters with pneumatics, you'll want to CAD them to ensure that the pneumatic cylinders do not interfere with each other.

Or you can just use a single cylinder with 1" stroke and an extension to shift both gearboxes at the same time


(not the greatest picture, but you can see the shaft linking the piston between both gearboxes)