|
|
|
 We have seen the difference in people's lives on our team as they went through the program. There are all sorts of examples, and I am sure you (and everybody other team) have similar stories. At the end of the day, that is really all that matters; changing lives in a positive manner. - tim-tim [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
#2
26-12-2011, 11:33
|
|||
|
|||
|
Re: FTC Programming Template
Assuming you're using RobotC, you can create a new program with the template by going to File->New->Autonomous/User control Template. The difference between this and a blank program is that the template has the waitForStart function call already in the program. This function is what makes your robot wait for the field to start before autonomous/teleop.
If you use LabView, it is the same concept, and you should be able to find more info here: https://decibel.ni.com/content/docs/DOC-18080 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode