|
|
|
 Prepare to be surprised, amazed, awed, and inspired. - Alan Anderson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Prepare to be surprised, amazed, awed, and inspired. - Alan Anderson [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#7
03-01-2012, 17:06
|
||||
|
||||
|
Re: Team 772 First WCD CAD
Both cross-members and corner gusset plates would be redundant in this WCD. The corner gusset plates would be unhelpful as the chassis will be welded (on a side note: some welders like to have corner gussets in before welding for alignment purposes but..it’s all personal preference). Also the cross-members can be replaced by a good belly-pan. Just make sure you support you transmissions and this looks like a great WCD.
Just a few questions...How are you going to tension the chains? and why did you choose the Toughbox Mini's? 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode