<R33> and Robot Figure 4-7: Contradictory?

[dexo568]

To the best of my understanding, Fig. 4-7 directly contradicts R33. Am I missing something?

Originally Posted by R33

Bumpers must be supported by the structure/frame of the Robot (i.e. the gap between the backing material and the frame must not be greater than ¼ in. and no section of Bumper greater than 8 in. may be unsupported). See Figure 4‑7.

However, in Figure 4-7, the example gaps of 7" deep, 7" wide and 1/4" deep, 10" wide are both marked as "OK". Doesn't the first gap violate "the gap between the backing material and the frame must not be greater than ¼ in." and the second gap violate "no section of Bumper greater than 8 in. may be unsupported"? Is the figure just wrong?