2012 Electrical Diagrams

[Al Skierkiewicz]

The difference lies in the use of 24 volt pneumatic valves and the associated wiring to the Crio solenoid module.

[DonRotolo]

To elaborate: If you are NOT using any Pneumatic Solenoid Valves that operate on 24 Volts, use the 12 V diagram. Otherwise, the 24 V diagram shows you how to supply those valves with 24 V legally. Note that they do make solenoid valves that operate on 12 V.

[Mike Martus]

And for our readers where specifically are these diagrams? I have looked on the FIRST site and could not find them.

[sam_who]

http://www.usfirst.org/roboticsprogr...rts-electrical