2012 cRio 2 cannot be found

[Hebrew]

Originally Posted by v2oxviesta

Alright, we finally fixed it. Here is what we did.

1. Used another computer to detect the device
2. Set the ip to detect automatically
3. Formatted the cRio (This will set the ip but fail)
4. Switched the ip address to 10.xx.yy.6 255.255.255.0
5. Disabled all other network adapters (Through adapter settings NOT THROUGH A WIFI SWITCH)
6. Imaged the cRio successfully

how do you switch the ip address? I am on a rookie team and have the same problem with the imager.