Imaging tool for the new 4-slot cRIO

[steinra]

We have a rookie kit of parts this year (I have mentored other teams in the past) and ran into this issue. I had already disabled the firewall when I ran across this thread. I first tried fixing the net mask from 255.0.0.0 to 255.255.255.0. That did not fix it. I then disabled the wireless network interface on the classmate and that did the trick.

So a fresh install of the classmate and the 4 slot cRIO out of the box direct connected with a cross over reproduced this same error until we disabled the wireless network interface. I may try putting the net mask back to 255.0.0.0 and see if that changes anything, but it is working now.

Not sure if that will help in the trouble shooting or not.

Thanks!

Randy