Quote:
Originally Posted by RufflesRidge
I just re-read your first post an saw Crossover cable. I'm not sure if the robot radio has auto sensing ports (allowing a crossover to work), but you theoretically should be using a patch cable, not a crossover.
What I would try is set up the camera with the tool, and leave it plugged into the PC. Change your PC IP to 10.xx.yy.5, open a browser and go to 10.xx.yy.11 Username: FRC Password: FRC. This is the configuration the Dashboard is expecting. If that works, then try moving it over to the switch.
|
We can get to this. Once power is removed and put back on it no longer works :/
If we succeed, we succeed as a team
if we fail, we fail as a team
but either way, we are a team - we go home together
and celebrate our accomplishments, whatever they are
and try to learn from our mistakes. - KenWittlief [more] 
Threaded Mode