CANJaguar timeout on cRIO startup

[kccowan]

Are you using a 2CAN? Last year, we had CAN timeout errors when the 2CAN was plugged into the radio but not when plugged into the CRIO. I know the CRIO II only has 1 ethernet port. I asked elsewhere here on how to best configure it this year.

KC

[jhersh]

Make sure your console out is off.

[ekgordon2]

Originally Posted by jhersh

Make sure your console out is off.

Thanks! Turning off the console solved the problem.

BTW I was using Serial, not 2CAN.

[Mike Copioli]

Originally Posted by kccowan

Are you using a 2CAN? Last year, we had CAN timeout errors when the 2CAN was plugged into the radio but not when plugged into the CRIO. I know the CRIO II only has 1 Ethernet port. I asked elsewhere here on how to best configure it this year.

KC

CAN timeout errors are usually caused by poor CAN connectivity. Connecting the 2CAN to an Ethernet port on the radio vs. the cRIO does not cause CAN timeouts. Connect the 2CAN to the radio it should perform as expected. If you continue to have issues while connected to the radio contact support@crosstheroadelectronics.com