Open Chassis Qs?

[FRC3883FRC]

Cool thanks. Didnt want to get to far and then have to start all over! hope to be posting pics soon!

[SenorZ]

We're going wide, with an opening, too. Just make sure you don't have any breakable bits near that opening unprotected.

[Brandon Zalinsky]

As an extension of that, do you need to put your team number on the open side if there's only 8" on each side? I saw in the manual that the number had to be in the center.

[MrForbes]

The manual does not say the number needs to be centered on the bumper.

[R35]

Teams shall display their team number on the Bumpers in four locations at approximately 90° intervals around the perimeter of the Robot. The numerals must be at least 4 in. high, at least ¾ in. in stroke width, and be either white in color or outlined in white. Team numbers must be clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots.

[Brandon Zalinsky]

sweet, thanks.