|
Failed comms to cRIO
So here's our situation. CRIO is fully imaged, DS is updated to version 11.30.11. We have attempted to connect via the port 1 on the cRIO and through our D-Link.
Crazy Part begins here:
We are able to ping both the cRIO and the D-Link, but we are not getting Robot comms (although the "Robot" light is on in the driver station).
We are thinking it's the D-Link (when I reset the D-Link, wireless setup page is blank, and there is option to set it up manually either). Have we missed a firmware update?
Also, last years robot (which for the time being, our control board has not changed) was driving the week of Christmas.
__________________
Team Resume
562 "S.P.A.R.K." - Student Programmer 2008-2011, Field Coach 2011
3623 "Terror Bots" - Technical Mentor, Field Coach 2012 - Present
Volunteer Resume:
BattleCry@WPI 12, 13, 15, 16 - Queuing
BattleCry@WPI 14 - Field Reset
Granite State District Event 2014 - Team Queueing
NEFIRST District Championships '14,'15,'16 - Team Queuing
|
I have postulated a theory that it is due to a resonance between gravity waves and the color purple. - petek [more] 
Threaded Mode