|
|
|
 The real world does not go together like an Erector set. FIRST robots should not either. - dlavery [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| The real world does not go together like an Erector set. FIRST robots should not either. - dlavery [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
13-01-2012, 22:03
|
||||
|
||||
|
Re: Stuck in evaluation mode!
You didn't mention the steps that you tried.
LabVIEW must be activated to use some features, this can be done via the "NI License Manager" and find the current version of LabVIEW. If it is green, then it is already activated, if not, then click on activate, and follow the prompts. I suspect that you may have not entered your serial number during installation. (Or it was mistyped.) 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode