|
|
|
 Half your robot could be broken, some drive chains snapped, a drive motor burned out, etc... and your WCD will still be trucking. - AdamHeard [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
|
|
| Half your robot could be broken, some drive chains snapped, a drive motor burned out, etc... and your WCD will still be trucking. - AdamHeard [more] |
|
|
|||||||
|
||||||||
|
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
dimensions of bridge hinge
This matter concerns the double hinges of the bridges. These bridges are vital components to the FRC coming up and I am having a difficult time figuring out the dimensions of the double hinges.
At the moment, my group and I have the following information: 1. The bottom levels of the bridges are 48 inches wide and 88 inches long. When tilted, the bridges are 2 feet off the ground. When leveled, the bridges are 1 foot off the ground. The beam that runs through the middle of the bridges are 6 inches wide and 4 inches in height. What are the dimensions of the hinges on the bridges? Any help is appreciated. Thank you! 
|
|
#2
13-01-2012, 22:38
|
||||
|
||||
|
Re: dimensions of bridge hinge
Look at page 19 of the Team Drawings.
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
