How to set up the cRIO and Classmate?

[Thundrio]

Your team should have gotten a USB stick (green I think) in the Kit of Parts which has the image for the classmate. Your first step is to put that in the classmate and when you turn it on hit f11 during boot to load the usb and image the classmate. from there you need to install everything from the usb key you received (with the lab view and other utilities). After that you download and install updates that are located online, and use the imaging program to install the java image (v43 is the current one AFAIK).

To actually run the program you will load up your project in Netbeans with the FRC plugins installed, and hit the green run button.

Oh and you will need to change your IP address on your computer to talk to the CRIO (Change the ipv4 to 10.xx.xx.y with x being your team number, and y being a single digit number that is not 2, since the cRIO address is typically 10.xx.xx.2).

I might be forgetting something so if you are still stuck, let me know, especially if I did not explain something well enough.

=)