Java to Crio Downloading Issues

[bdbayes]

The computer is unable to connect to the robot. There is likely an iphone address set incorrectly somewhere.

[pureFloat]

Ok, we got it. It turns out I overlooked firewall. Stupid firewall. However, now we're running into a new issue. Netbeans is now giving us this message:

Waiting to connect to OTA command server of 10.35.6.2:8001 for past 43s
Waiting to connect to OTA command server of 10.35.6.2:8001 for past 44s
Waiting to connect to OTA command server of 10.35.6.2:8001 for past 45s

It keeps going on. My friend says it should work in 7 seconds, but now it's at around 700. Does anyone know what this means and how we can fix it? Thanks to anyone who helps.

[austin1743]

Originally Posted by pureFloat

Ok, we got it. It turns out I overlooked firewall. Stupid firewall. However, now we're running into a new issue. Netbeans is now giving us this message:

Waiting to connect to OTA command server of 10.35.6.2:8001 for past 43s
Waiting to connect to OTA command server of 10.35.6.2:8001 for past 44s
Waiting to connect to OTA command server of 10.35.6.2:8001 for past 45s

It keeps going on. My friend says it should work in 7 seconds, but now it's at around 700. Does anyone know what this means and how we can fix it? Thanks to anyone who helps.

hello, we are having the same problem as you, we dont have any firewall running that we know of and have had 3 people check it. Can you tell us what you did so we can try to fix ours?

we try to send code but get the same error that says connection has timed out and we can't figure out why....


heres what we get...

Target IP: 10.0.0.2
Network interfaces on host:
Intel(R) 82567LM Gigabit Network Connection: address: 10.17.43.5 netmask: 255.0.0.0 <--- on robot's subnet
Intel(R) WiFi Link 5100 AGN: address: 10.10.12.154 netmask: 255.255.255.254
Connecting FTP @10.0.0.


we are thinking we need to change the target ip address to the 10.17.43.5 but are unsure of how to do this and are trying to figure out if this is the real reason for our problem...

[TravSatEE]

There is a netbeans configuration option to change, in the menu:

Tools -> Options -> Miscellaneous -> FRC Configuration

Change your team number.

This step is missing from [1]. Their section on Netbeans is a little sparse and references an older version (6.7). No one took credit as author on that document to suggest this change.

[1] http://www.usfirst.org/sites/default...20System_2.pdf

[jesusrambo]

Open up your netbeans settings, click the miscellaneous tab, click the FRC Java tab, and set your team number in there.

[austin1743]

thanks, we have done that and will test it in a few hours. I will respond back if it works.
when we set it in netbeans we got set remote address to (10.17.43.2) which i am going to assume is correct?

also...
using command prompt and the ipconfig command,

we have the:
IPv4 - 10.10.12.154
subnet - 255.255.0.0
default gateway 10.10.0.1

we are team 1743 so i know it should read (10.17.43.6) there...

but i am unaware of what it should correctly read.... Can someone post up an accurate example of exactly how it should be?

[Patrick Chiang]

Originally Posted by austin1743

thanks, we have done that and will test it in a few hours. I will respond back if it works.
when we set it in netbeans we got set remote address to (10.17.43.2) which i am going to assume is correct?

also...
using command prompt and the ipconfig command,

we have the:
IPv4 - 10.10.12.154
subnet - 255.255.0.0
default gateway 10.10.0.1

we are team 1743 so i know it should read (10.17.43.6) there...

but i am unaware of what it should correctly read.... Can someone post up an accurate example of exactly how it should be?

What is your exact setup? If you use the wireless router on the robot as an access point, you don't need to configure the default gateway on your computer. Disable DHCP on the router and manually change your address to 10.17.43.x, where x is an integer 0~255 and not 1, 2, 4 or 6, or 11 (to be safe).

[austin1743]

so we fixed the ip address issue (thanks for the help)

now we got another issue (lol)

we are getting an error where it says looking for frc_2012_v43.zip but got frc_2011_v28.zip

we tried looking for where it is calling for this file path but we couldn't find it... our netbeans is updated to the fullest and has all of the plug-ins installed...

[Patrick Chiang]

Originally Posted by austin1743

so we fixed the ip address issue (thanks for the help)

now we got another issue (lol)

we are getting an error where it says looking for frc_2012_v43.zip but got frc_2011_v28.zip

we tried looking for where it is calling for this file path but we couldn't find it... our netbeans is updated to the fullest and has all of the plug-ins installed...

Two things you should try:
1. Update your cRio flashing utility. The 2012 version has some major changes done to it.
2. Uninstall, reinstall the plugins in netbeans. Those plugins *should* contain the cRio image files.

[austin1743]

ok the flash utility is just the cRio imager correct?

our netbeans is currently up to date with all of 2012's updates for frc.

will keep you guys informed..


we are using wired connection right now and trying to get that set-up before wireless...