Go to Post I don't care what the team numbers said, on Friday there were no rookies there. - Taylor [more]
Home
Go Back   Chief Delphi > Technical > Programming > NI LabVIEW
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Spotlight this post!  
Unread 14-01-2012, 18:52
IrksomeZeus IrksomeZeus is offline
Electrical Team Leader
AKA: Austin Yates
FRC #3003 (Tan(x))
Team Role: Electrical
 
Join Date: Jan 2012
Rookie Year: 2010
Location: Canandaigua, NY
Posts: 12
IrksomeZeus is an unknown quantity at this point
Re: Help with pneumatics

you will most likely need the accumulator unless you are using a very small piston or actuator to hold enough air in the system to completely move your piston. I dont know the code but you basically just tell the robot that when the pressure reaches 120psi (i think that is the max for everything before your working system i.e before your pressure regulator) that the compressor needs to turn off. you get the pressure from the pressure switch connected to the digital sidecar. For the solenoids all i now is that by sending electricity to one side versus the other it actuates it...you do this with the solenoid breakout on the cRio
Reply With Quote
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 21:08.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi