|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Check your robot and trace the wire(s) leading to the linksys (or other internet device) until it plugs into the breaker box on your robot. Then make sure you are supplying the correct number of amps. We had the same problem today. The ampage will be displayed on the actual device
-Team 343- |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|