cRIO updating to v43 Image issue

[Aren Siekmeier]

Originally Posted by Zuelu562

Right now, our cRIO is not communicating with DS at all, although we can ping it.

Driver Station Version: 11.30.11
Language: C++
Problem:When attempting to image the cRIO with image v43, it will fail the first time (I will have access to the robot again Wednesday night, getting the same error as a couple people earlier in the thread) and the second time it will succeed, but we still can't get comms with the cRIO via the DS.

Attempted: Safe Mode Formatting, multiple attempts. Same end result.

Edit: Mark, I will attempt to use knowledge from post #19 in the thread. Thank you very much.

We have this same issue. We can ping the cRIO, but the "Communications" light on the Driver Station is not lit. We can also deploy code from LabVIEW, but we still can not enable because the Driver Station will not recognize the cRIO. The RSL is flashing quick blink with long wait, indicating no comm as expected.

We have tried Safe Mode formatting, repeating reimaging, updating the driver station and utilities, running both wirelessly and tethered, and everything else we can think of. Any ideas?