|
Axis 206 image off center
For the last three seasons we have noticed that our image from the axis 206 is off center. When the camera is physically pointed directly at a target, the image we see is from about 20 degrees to the left and 5-10 degrees up. We have been able to compensate for this in the past by simply shimming the camera mount.
This year we would really like to have as wide a view of the actual target area as possible.
From my experience with imaging systems as part of my carrier, I know that this misalignment of the image is caused by the lens not being centered on the detector inside the camera. So, the questions I/we have are:
1)Has anyone else seen this issue with your Axis 206 camera?
2)Has anyone opened these cameras and/or attempted to adjust the detector position with respect to the lens?
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|
GP is a measurement that can only apply to yourself. To apply it to another is unfair to that person/group. - Andrew Schreiber [more] 
Threaded Mode