Bridge question

[lcoreyl]

Originally Posted by Brainless96

It took 60 lbs on each side to keep the batteries at 28 inches on the better side (the one that will go to 16 in before tipping). With 60 lbs on each side it makes transporting it a real problem so it is not very practical to use this as a final solution. Has anyone come up with a way to use surgical tubing or something like it to fix these problems?

You're likely not going to get performance that is as good as the weight. Also, if you're not tipping the same on each side, then you can fix it by not evenly spacing the 60 lb weights--if you move them around you can get both sides to balance properly.