Labview CAN Error -1073807246

[jhersh]

Originally Posted by zaphodp.jensen

My question sounds like a weird question, but what other "console" comes out through the serial port?

There is a serial console available. It is controlled by the Console Out DIP switch (virtual on the cRIO-FRC II). You need to turn it off to use the black jaguar bridge plugin.

[zaphodp.jensen]

And I have confirmed that the console switch has been turned off (In fact, the imaging software will not let you image it with the can to serial bridge enabled), and the problem still exists.

[zaphodp.jensen]

I solved it. I just reimaged the cRIO (making sure the console switch was turned off), and that appeared to fix it and now it worked.

[Alex698]

I was having a similar issue as described above, after re-imaging the cRIO-II, I noticed that the console out option had been automatically switched to the ON position, I changed it back to OFF, hit apply and now I am in business. Hope this helps someone in the future!