|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
|||
|
|||
|
Re: Jaguars are blinking yellow
The Jaguars will blink yellow when they don't receive a signal. There could be a few problems here.
Do you have all of them connected to a signal source (PWM or CAN)? Is your code set to give a signal on the correct channels? Did you enable the robot from the driver station? Hope this helps! |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|