|
|
|
 You don't have to beat stronger teams to get better... to get better is to be forced to push the envelope against stronger teams. - Shankar M [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| You don't have to beat stronger teams to get better... to get better is to be forced to push the envelope against stronger teams. - Shankar M [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
16-01-2012, 13:27
|
|||
|
|||
|
Re: Jaguars are blinking yellow
Sorry, I'm unable to help you with your code since our team uses LabVIEW, but from your description, it does sound like you're using PWM. Also, there shouldn't be a need to use the USER button on the jaguars. Holding down the button for 4 seconds will reset the Jaguars to the default factory state, which shouldn't be necessary. I would recommend checking all of the things that were mentioned before and see if any of those fix your problem.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode