|
|
|
 If you're the smartest person in the room, you're in the wrong room! - Ian Curtis [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| If you're the smartest person in the room, you're in the wrong room! - Ian Curtis [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Can not connect to Real-Time target
It was working fine, i could talk to it, image it and ping it, all of a sudden, it just stopped talking to me, I am suspecting a bad image, I was changing back and forth from Java to LabVIEW. Could I send it in and get it formatted at NI?
|
|
#2
17-01-2012, 07:24
|
||||
|
||||
|
Re: Can not connect to Real-Time target
You can format the cRIO yourself using the FRC cRIO Imaging Tool. It should be on your desktop after you install Labview
|
|
#3
17-01-2012, 09:20
|
|||
|
|||
|
Re: Can not connect to Real-Time target
If I'm not mistaken you can reimage the c-rio using the imaging tool from labview. Our team ram into a problem were we had to turn off the wireless card and firewall to get it to image correctly.
|
|
#4
17-01-2012, 18:56
|
||||
|
||||
|
Re: Can not connect to Real-Time target
Well i cant even ping it, ive turned off all other network connections and it sill wont respond to pings and the imaging tool wont find it
Last edited by Doc543 : 17-01-2012 at 18:59.
|
|
#5
18-01-2012, 13:29
|
||||||
|
||||||
|
Re: Can not connect to Real-Time target
Quote:
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
