|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Direct Drive Launcher Motor Help
Hey guys, we were wondering what would be the best way to directly power a wheel that will be mounted on our launcher. The motor will be a Bane Bot with a rs775-18 planetary gearbox. The wheel is a 4 inch plaction off Andy Mark.
Any suggestions for hubs, axles, etc. would be greatly appreciated. Thanks, Ryan |
|
#2
|
||||
|
||||
|
Re: Direct Drive Launcher Motor Help
AndyMark has a set of hubs that would fit the plaction wheel: http://www.andymark.com/Hubs-s/215.htm
You can get couplers and a longer shaft of McMaster to extend the shaft from the gearbox, which I believe is an 1/2 inch keyed shaft. We are doing something similar but using the CImulator gearbox. |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|