SO...alternative to ramps...

[Chris is me]

Originally Posted by SuperNerd256

Use 4 wheels, don't use 2009 wheels, don't have the motors where they can contact the bump.

Doesn't work as well as you'd hope, at least with kit wheels.

[PayneTrain]

I would put 6 wheels on there if you're going long over wide, or you're going to have a host of problems with controlling the drive.

[Joe Johnson]

Originally Posted by PayneTrain

I would put 6 wheels on there if you're going long over wide, or you're going to have a host of problems with controlling the drive.

Mixed bag. The middle wheel helps with respect to turning on the flat floor but it makes crossing the barrier a bit more exciting (read, tippy).

You pays your money and you picks your poison...

Joe J.

[pfreivald]

So the question is, "how can a band saw help me cross the barrier?"

[ThunderTrain]

four wheels can cross the barrier if you allow ffor a skid plate between wheels to prevent it from getting stucck in the middle. also motors should be mounted to the top of the frame.