Varying Regulator Pressure Using Mechanical Device

[hocman22]

Originally Posted by Garrett.d.w

You could have multiple one way solenoids, each with its own regulator. Any weirdness could be fixed in code.

The way it would work is that you use multiple single function solenoids (or just a standard two way with one output blocked) to feed air into the solenoid and one solenoid as an exhaust. This setup would have to be repeated per function (in, out, etc). It would be ugly, but it would work.

If you find a way to reliable change air pressure I would like to know

A bit of googleing (yes... google as a verb) found these (http://www.smcetech.com/CC_host/page...6669613456b3f5)
They are electronic regulators, don't know if they are good for a robotics aplication, but it would be interesting to try.

So with the link you posted..... is it possible to program it to fire a cylinder at different pressures?

Can we take a shot at 60 psi, then go to 55psi on the next one then drop to 30psi?