4-slot cRIO and default modules

[Alan Anderson]

Originally Posted by mikets

So again, just to make sure I understand it correctly. In theory, if I put three analog modules in the 8-slot cRIO, the first one in slot 1, the second one in slot 4 and the third one in slot 5 (I suppose this is still legal ). I can address them by:

Gyro(1, 1);    //Gyro in slot 1, channel 1
Gyro(2, 1);    //Gyro in slot 4, channel 1
Gyro(3, 1);    //Gyro in slot 5, channel 1

Does it sound right? If so, they should have called it "instance" instead of "moduleNumber".

Not right. No modules are supported in Slots 4 or 8 of an 8-slot FRC-cRIO.